Hi. I'm Ted with Everything Attachments and we're here today with the King Kutter Heavy Duty Series blade. This blade can easily take up to 80 horsepower, maybe a little more. It's the got the category II and category I hitch. Right now it has the category I pins in it. This can be changed out to a category II. It has a three quarter-inch thick hitch plate here with a gusset. This is their heaviest series of blades. This has the tilt, which is going to allow you to make a crown in your road, or whatever you're doing, and also angles forwards and backwards, has five different positions in each direction. But it's gusted up really good. It has bracing in every direction for the higher horsepower tractors. So on the back of the heavy duty blade from King Kutter, you can tell there is a ton of bracing in here. It's braced at every angle all the way to right near where the cutting edge is on the other side, with a complete brace from one side to the other, and then braced from top to bottom. All of this steel back here that's in the angling part is three quarter-inch steel, notched out. It's spring-loaded for easy access so one man can adjust this side to side from his tractor. Same way when you're going to do the tilt. One man can push that lever right there and be able to tilt the blade down with no problem, even though it's a very heavy blade. The best thing about this blade is that it's made here in America and it's sold at Everything Attachments. Super heavy duty for all your snow removal uses, long gravel roads. There are a lot of uses for this blade, super heavy duty for your larger tractors.
|