AgriMetal's creative designers built a LARGE diameter impeller and put it INSIDE the pickup head (patent pending). Leaves and debris are sucked into both sides of the impeller and has only a few inches to travel to the hopper. So, as a result, it's like having 2 blowers housing and 2 impellers on each collector.
The 22 inch diameter impeller offers the following additional benefits:
-Longer longivity because it is turning slow.
-Slower RPM means quiet operation (low decibel).
-A low RPM means less dust being raised.
AgriMetal collectors feature an innovative rotor with super light nylon flails that lift up the leaves, thatch and even picks up pine straws out of the fine turf. The nylon flails are very effective even in the tall grass and yet so gentle that it will not mark the turf.
Optional: A heavy duty nylon bristle brush which offers exceptional performance for spring cleanup and quick & easy grass collection in summer months. Switch from flails to bristles in minutes! Also available, an optional mulching kit to break up leaves so as to load more into the collector for less trips to the dump site.
To hitch: As simple as dropping a pin through the hitch, no needs to connect to the mower.
Unloading: A manual or hydraulic apron offered as an option, unload the hopper quickly scraping the floor clean even when loaded with wet clipping or and leaves.
Manoeuvrability: Compact designs allow unparalleled access to areas others can't reach.
2 Models to fit your cleanup needs
Model 4413 1.3 cubic yard holding capacity is the perfect choice for a medium size area. Easy to handle and low enough to pass under tree branches.
Model 4420 2 cubic yards holding capacity for larger areas. Features a 7.5 horsepower engine with electric start.
Optional: Hydraulic apron for fast & easy unloading available on the 4420 only.
Capacities: 1.3 yard = 35 cubic feet, 2 yards = 54 cubic feet
