We cut the size down, but we didn’t cut corners getting there. Built to the same exact standards as our larger mowers—especially our industry-leading 1/2½ steel front forks, 2½ x 2½ tubular steel framing and 7-gauge solid steel deck—the ZT can tackle virtually any lawn you can throw at it. There’s even a gate-entering 36½ wide cutting deck version for the smallest of residential lawns. With new auto-neutral handles and featuring electric deck height and electric blade start, it’s a commercial quality mower wrapped in fun.
DECK
Cutting Width
3600-36"
Cutting Height
1.5" - 5" w/Deck Height Control System
Blades
3600-1/4" x 2 1/2" x 18", High Lift, Heat Treated
Lift and Height Adjustment
Instant Lift Electronic Actuator
Blade Belt
Single V-Belt Spring Tension
Anti-Scalp Rollers
3600-4 Total (2 Front, 2 in rear)
Deck Flotation
Floats on 2 Chains & 2 Front Leveling Arms
Deck Thickness
3 /16" Thick Solid Steel
ENGINE
Gross Horsepower
26HP Air-Cooled Briggs & Stratton Inteck ELS
Cylinders
V-Twin
Displacement
725 cc
Maximum Torque
33 ft. lbs. @ 2600 RPM
Fuel Requirement
Unleaded Gasoline (87 Octane or higher)
Fuel Capacity
10 Gallons
Fuel Filter
Replacement Automotive Type
Cooling System
Air-Cooled
Ignition
Electronic
Starter
12 Volt
Charging System
16 Amp
DRIVE SYSTEM
Transmission
Dual Integrated HydrostaticTransaxle
Pump Drive
Integrated Axial Piston Pump & Motor w/ Gear Reduction
Wheel Drive
Integrated with Commercial Grade Gear Reduction
Hydrostatic System Oil
20W/50 Motor Oil
Hydraulic Filter
25 Micron, Replaceable Spin-On Type, 1 Per Axle
Pumps (2)
Pump and Motor Integrated in one unit
Hydraulic Coolers (2)
7 " Cooling Fan Per Unit
OVERALL UNIT
Overall Height
46"
Overall Width
Overall Length
74 1/2"
Tire to Tire Width
45"
Tires-Front
13 x 6.5-6 Smooth Tread
Tires-Rear
3600-21 x 7-10 Turf Tread
Steering
Dual Lever Steering, Independent Control
Turning Radius
Zero Degree, Turns Within Unit Length
Ground Speed (Forward)
0-7 mph
Parking Break
Internal Parking Brake
