FEATURES:
• Efficiently digs trenches up to 6 ft deep
• Provides excellent mobility for digging footings
• Optional fixed thumb available
• Bucket linkage improves bucket breakout force with increased bucket rotation
• Bucket sizes available: 10”, 12”, 16”, 18”, and 24”
• Mounts easily on all major skid-steer loader brands with Universal Skid Steer Quick Attach
• Fully engineered and tested in rigorous real life conditions
• Replaceable hardened bushing and greasable fittings on all pivot points which reduces maintenance costs
• Stress Proof pins provide higher strength and increased wear resistance
IMPORTANT NOTE: Some skid-steers will require the addition of a tilt circuit hydraulic relief valve.
This cartridge in IN ADDITION TO THE EXISTING RELIEF CARTRIDGE and is required to protect the circuit of the skid-steer. Failure to install the cartridge when required can result in damage to the skid-steer and will VOID all Bradco warranties. CASE: Models 1845C and XT units require no additional relief. DEERE: Models 4475, 5575, 6675, 7775, and 8875 require JD cartridge (JD part# MG86529091). Models 240, 250, 260, and 270 control valve EXCEPT for models with serial numbers greater than 440001 (JD240), 450001 (JD250), 460001 (JD260), 470001 (JD270), and 480001 (JD280), which require no additional relief. BOBCAT: Units with BIC do no require relief. Units without BICS but with a plug and relief on the tilt spool, require Bobcat part# 6599161 to replace the plug. GEHL: Models 7600 and 7800 and MUSTANG 2095 and 2105 install GEHL part# 138703. NEW HOLLAND: Install relief cartridge (NH part# 86529091).
