Home > Tractor Loader Buckets > Compact Buckets >

Construction Attachments Compact Tractor 4-in-1 Multi-Purpose Bucket

Construction Attachments X-Treme Duty Compact Tractor 4-in-1 Bucket, CAL, Model 1MPCMP,

Construction Attachments Compact Tractor 4-in-1 Bucket with optional teeth

Alternative Views:

The Construction Attachments Compact Tractor 4 in 1 Bucket is the best choice for compact tractors up to 50hp. Offered in 54", 60", 66" & 72� widths, we can match a compact 4 in 1 to virtually any tractor and loader frame in that category. The compact model 4 in 1 is offered only in the standard bottom since maneuverability is typically a greater concern for these machines than front edge visibility. Tractors in this category typically lack the ground traction and fixed loader arm stops required for precise grading operations, so we have tailored this bucket specifically to excel in the loading, back dragging, back filling and scraping operations where these machines are just right for the job.

Please note; Only the size you choose from the drop down menu will go to your cart if you click 'add to cart'. If you leave NONE in the box, it will not go to your cart.

Free Shipping within the Continental USA!

Our Price:

Product Code: CAL-BUCKET MP 1MPCMP-COMPACT

CAL-Compact 54" MP Buckets

CAL-Compact 60" MP Buckets

CAL-Compact 66" MP Buckets

CAL-Compact 72" MP Buckets

CAL One-Touch Kit

Description

Loading operations are improved dramatically by adding our four in one to a small tractor loader simply through the ability to bottom dump the bucket. The loaders are designed to keep loads as close to the center of gravity of the tractor as possible for safety and stability and as a side effect are often unable to turn over and dump a standard general purpose bucket into a truck or trailer with high sides. With a Construction Attachments 4 in 1, if you can reach over the side you can load it by simply using the bottom dump. The four in one has a welded cutting edge on the rear of the bucket clam that allows the bucket to be opened and used much like a box blade for back dragging operations. In this position the bottom clam can be used for close quarters back filling or with an almost 20� opening the clam can be tilted out of the way and the reinforced dozer back can be used for backfilling or scraping. There is a matching welded cutting edge on the dozer back to insure long life for these operations from pushing gravel to removing snow.

Just like the skid steer four in ones and our larger loader backhoe/ wheel loader models the compact four in one is constructed of A572 grade steel throughout the fabricated components with 1065 welded steel cutting edges. Bolt on digging teeth are optional, as well as, an optional 1085 steel bolt on reversible cutting edge for the front clam blade. The clam sides are reinforced front and back with plasma cut side cutters to the front and doubler plates to the rear to compliment the �� clam sides. The clam bottom is of bent 3/16� material in 2 pieces designed to reinforce one another in opposing operations with a welded �� X 4� cutting edge in the front and a welded 3/8�x 3� cutting edge in the rear. The dozer blade is precision step broken to a radius moldboard with 1/4� sideplates and 3/8� plasma cut dozer reinforcements. The dozer sides are also doubled at the clam point for long jaw life and no flex when using the clam to pick items up.

The clam mechanism itself is designed to pull short items in toward the center of the dozerback so that material isn�t pulled back toward the tractor wheels when clamped. The dozerback is further reinforced across the entire top with 2�x2�x1/4� box tubing and a broken out 3/16� lower reinforcement bar at the bottom. The clam pivots using a heavy fabricated hinge on 1� 1045 cold rolled pins with easily accessed grease zerks for bucket pivots as well as the 1� cylinder pivot pins. The bucket comes standard with an extreme duty universal quick attach hitch, but can be fitted with any pin on hitch required that is applicable to the frame, as well as, any ag style hook hitch that is appropriate for the bucket frame.

A Construction Attachments ONE TOUCH KIT may be required for compact tractors without an auxiliary control on the loader valve.

Technical Specifications:

COMPACT X-TREME DUTY 4-in-1 Multi-Purpose Bucket

Model	# of Teeth	Width (in)	Headed Capacity (cu ft)	Max Clam Opening	Product Weight (lbs)
1MPCMP54	0	54"	6.7	19.0	390
1MPCMP54T	5				420
1MPCMP54E	0				460

1MPCMP60	0	60"	7.5	19.0	430
1MPCMP60T	6				460
1MPCMP60E	0				495

1MPCMP66	0	66"	8.3	19.0	475
1MPCMP66T	6				490
1MPCMP66E	0				530

1MPCMP72	0	72"	9.1	19.0	500
1MPCMP72T	7				520
1MPCM P72E	0				552

Related Products...

Construction Attachments Compact Root Grapple

Add

Construction Attachments X-Treme Duty Compact Tractor Root Grapple

Construction Attachments GP Compact Standard Bkt

Our Price:
Add

Construction Attachments General Purpose Compact Tractor, Loader, Standard Bucket, CAL, 1GPCMP

Bradco 4-in-1 Compact Tractor Bucket

Our Price: $2,880.00
Add

Bradco 72" 4-in-1 Compact Tractor Bucket

Our Price: $2,987.00
Add

Share your knowledge of this product with other customers... Be the first to write a review.

	Harley Rake, Tractor PTO, T-6 Series 6' Power Box Rake $8,205.00
	Construction Attachments X-treme Duty Grapple Bucket 1GBE
	Amulet TILT BUCKET for 7.5-9 Ton Excavators and Backhoes $5,390.00
	Construction Attachments GP Low-Profile Standard Bottom Bucket 1GPSB
	Construction Attachments 4-in-1 Severe X-Treme Duty High Capacity Bucket
	Bad Boy Mowers Pup Series 23HP Vanguard, 52" Deck $6,395.00
	Construction Attachments 4-in-1 Severe X-treme Duty Bucket
	Construction Attachments X-Treme Duty Industrial Pallet Forks 1PFIND
	McMillen Drive Unit Auger Bit Adapters