Home > Fred Cain Rotary Cutters >

Fred Cain Square Deck Rotary Cutters with Slip Clutch
Fred Cain Agricutter Rotary Cutter with Slip Clutch
Fred Cain Agricutter 5' Tractor Rotary Cutter


 

Fred Cain Agricutter Rotary Cutter with Slip Clutch

This is the Fred Cain Agricutter, with 45 HP Gearbox, Splined with Slip Clutch PTO Shaft, Round Blade holder, (Stump Jumper) and Laminated Tail Wheel, this is the square deck rotary cutter.



Width
Weight
4'
500 lbs.
5'
700 lbs.
6'
800 lbs.




Product Code: FC-SC-ROT-CUT
NO LONGER AVAILABLE

Description Extended Information
 
Fred Cain Agricutter Square Deck Rotary Cutter with 45 HP Gearbox and Slip Clutch Protection Free shipping within 1,000 miles!
More
104 105 106
CUTTING WIDTH 45 inches 58 inches 70 inches
OVERALL WIDTH 51 1/2 inches 62 1/2 inches 75 inches
OVERALL LENGTH 97 inches 102 inches 116 inches
CUTTING HEIGHT 3 1/2 inches to 10 inches 3 1/2 inches to 10 inches 3 1/2 inches to 10 inches
SIDE DEPTH 7112 inches 8 inches 8 inches
BLADES 1/2 x 3 with Uplift 1/2 x 3 with Uplift 1/2 x 3 with Uplift
BLADE HOLDER 1/2 x 4 Bar with 1/2 x 4 Bar with 1/2 x 4 Bar with
22" Round Pan 22" Round Pan 28" Round Pan
BLADE TIP 9,352 Ft/Min 12,053 Ft/Min 14,547 Ft/Min
SPEED @ 540 RPM
GEAR BOX 45 HP - 1 :1.47 Ratio 45 HP - 1 :1.47 Ratio 45 HP - 1 :1.47 Ratio
DRIVE LINE Series 4: With Shear Bolt
Connection or 6B Spline
Connection OR 6B Spline
Connection with Shock
Absorbing Coupling &
Torque Limiting Clutch
Series 4: With Shear Bolt
Connection or 6B Spline
Connection OR 6B Spline
Connection with Shock
Absorbing Coupling &
Torque Limiting Clutch
Series 5: With Shear Bolt
Connection or 6B Spline
Connection OR 6B Spline
Connection with Shock
Absorbing Coupling &
Torque Limiting Clutch
WEIGHT Approx. 500 Ibs Approx. 700 Ibs Approx. 800 Ibs
DECK 11 GA HR Sheet 11 GA HR Sheet 11 GA HR Sheet
SIDES 11 GA HR Sheet 11 GA HR Sheet 11 GA HR Sheet
SKIDS 5/16 x 2 HR Bar 5/16 x 2 H R Bar 5/16 x 2 HR Bar
WHEELS Laminated Puncture Proof Laminated Puncture Proof Laminated Puncture Proof
4x8x15 4x8x15 4x8x15
LINKAGE Category 1 Category 1 Category 1

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Fred Cain bush hog with slip disk August 27, 2019
Reviewer: Bob Pauli Jr. from ST Louis, MO United States  
Excellent and durable after twenty hours of cutting over tough terrain.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 December 3, 2018
Reviewer: Lyle Kerby from Grantsville, WV United States  
It doesnt seem to be as heavily made as the 4ft Fred Cain that I have..The metal doesnt seem to be as heavy or durable..the paint job was terrible although it is a brush hog and that isnt critical, but my other Fred Cain even after 14 years of use looks better..I have used it twice and it is OK.

Was this review helpful to you?