Equipment Financing Provided By
Join our mailing list!
KING KUTTER II GEAR DRIVEN ROTARY TILLERS are designed to perform with its heavy duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs. This Category 1 tiller includes a PTO shaft with heavy duty slip clutch. Available in 4, 5, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks.
Hi. I'm Ted, from Everything Attachments. We are here today with the King Kutter Series 2 of rotary tillers that are PTO-driven, for your tractor. This uses a heavy-duty gear box with a slip clutch on it instead of a sheer bolt, so if you hit a stump or a large rock in your garden, it's going to slip the clutch instead of sheer the bolt and make you have to get off and work when it's probably a hot day. It has 6 blades per rotor. It has a lot of wearing distance from the front to the back. It has a really solid square frame made around the whole assembly, making this a really heavy-
duty tiller. It is Quick Attach compatible. On your main pins, it has the 2 holes here for a standard Quick Attach or a John Deere iMatch hitch.
King Kutter has 2 different series of tillers, but they're going to just this series from the best I can understand it, which is the Series 2. This has a large casted piece over here, where your bearings are running on your main rotor assembly that's greasable. Really heavy-duty. They have a patent on this stand here, that just folds down, keeps this from falling over on you because it's like a wheel under there, so you put out your kickstand while you're hooking it up to be safe. You have 4 adjustments on your main slides here, that's going to control your depth of how deep you're digging.
You have an adjustable tail gate on the back; adjustable with this chain, and that's what's going to control the consistency of your dirt. Between your tractor speed, your tail gate setting, how much moisture is in your ground, and the type of dirt you have, you're going to want to get it to where it's not completely pulverized but smooth enough that you can plant in it easily.
King Kutter uses all gear-driven tillers; every tiller they make is gear-
drive. This has a large gear in the center, 2 small gears on each side. I've never had a problem. Sold over 100 in the last year. King Cutter's given us an excellent quality of all the ones we've shipped. If they didn't, we wouldn't be selling them here at Everything Attachments. They've been really good. We've sent a lot of them out with 0 problems so far. That's hard to beat; 0 problems.
It has a vent at the top. Make sure everything . . . this is this plug here. Basically, you'll pull this plug out, fill it at the top until it runs out of this plug, and then you're full. With the King Kutter tiller, you want to match the size of the tiller to your tractor. Your ground has a lot to do with how much you can pull. If you'll give us a call or an e-mail at Everything Attachments, we'll make sure that you get the right size tiller for the type of ground, and for what you're doing in your area