|
Width adjustment range: 6" to 33"
Heat treated blades, bolt-on for easy replacment
Hillers use heavy duty ball bearings and a 3/4" arbor bolt
The Garden Bedder is equipped with both a Category I and a Category I narrow hitch for sub-compact tractors. The 50 inch multi hole toolbar allows the bedder shanks to be adjustable for widening or narrowing the bed.
The 14 inch disc hillers have two sealed bearings to keep the dirt out, and bolt on for easy replacement. The optional furrow attachment with shovel point to lay off a row, bolts to the front of the beam. The shovel point can be changed to a different size if a larger row width is needed. The furrow attachment with shovel point weighs 15 pounds.
BUILT TO HIGH QUALITY STANDARDS AT A LOW PRICE
| MODEL |
WIDTH |
WEIGHT |
CATEGORY |
| GB 50 |
50 Inches |
87 Lbs. |
3 Pt. and Narrow 3 Pt. |
| OPTIONAL: |
FURROW ATTACHMENT |
16 Lbs |
NOT INCLUDED |
|
Hi. I'm Ted, from Everything Attachments. We're here today with the
Everything Attachments Garden Bedder. This is the GB-50. It measures 48
inches in length, and it's meant for small sub-compact tractors or full-
sized tractors; that's why it has the 2 sets of pins. For a small, low-to-
the-ground tractor with a narrow hitch, it has the bottom pins, or the
standard hitch at the top. You can choose which top link hole you need to
use according to your tractor.
This whole piece is built in our manufacturing facility. This is not just a
piece of angle iron. This is 3/8-inch thick. It's made in a Whitney, which
can punch holes in plasma high-def cut at the same time. We punch all these
holes, round all these corners, and then bend it in a press brake. It's
gusseted a couple of places to make it stronger. We've just engineered the
rear furring attachment, which we'll go over in just a second. We normally
only offer this with the bedding attachments, which are your disks here, or
your hillers, and a front furring attachment, which was this piece right
here, and then it was put on the front here with the U-bolts. You can still
get the front furring attachment. You would remove your disk and just
furrow your flat ground where you're planting your corn, or whatever. You
would just drag your shovel down through there to make a nice ditch so you
can cover up your seed.
If you're making a hill and want to be able to make a nice trench in the
middle of your bed, then we've designed this rear piece to go on here. This
actually is for the GB-60 which has 4 holes like you see in it. The one
that is for the 50 that we're engineering will actually bolt on with just 2
bolts and will go to these outer holes here, but everything about the back
part of it is the same. This is optional. We have not been offering these
on them, but we've been getting a lot of requests to get the sweeps on
them. What that does is, for your tractor as it goes down the row where the
tires pack the ground, these sweeps break up the ground that's been packed
by your tractor. We will offer the GB-50 with just the bedding disk like we
are now, or we'll offer it as a complete unit with the sweeps, and then
we'll also always offer it with the front or the rear furring attachment.
We've done a lot of work here at Everything Attachments to get this
American-made, in-house, painted right here, sent to you. This can be
disassembled and shipped UPS for your convenience; it'll come right to your
door. The main frame will be in one box, and all of these other components
will be put in another box and shipped to you. At Everything Attachments,
if you'll give us a call or an email, we'll make sure you're getting the
right bedding attachment for your use. We offer it in a 50, a 60, and now a
70, if you just need a larger tool bar.
Just look under Garden Bedders at Everything Attachments. Give us a call or
an email. We'll be happy to help you.
|
bedder 
