My Account / Order Status
Find Products By
Tractor - TLB Attachments
Skid Steer Attachments
Mini Excavator Attachments
Mower / Turf
Equipment Financing Provided By:
Join our mailing list!
(Your shopping cart is empty)
Browse by Tractor
New Holland Tractors
Everything Attachments Tractor 3 Point Hitch Bale Unroller for 4 ft wide x 5 or 6 ft Tall Bales
Tractor 3 Point Hitch Bale Unroller for 4' Bales
Tractor 3 Point Hitch Bale Unroller for 4' Bales up to 6' tall, 1500 lbs. capacity, with 2 1/2" x 8" Hydraulic Cylinder Free Shipping within 1,000 miles!
Click Here to view a 360 Degree view of this product
Read Everything Attachments Product Warranty
The bale unroller with the narrow design will handle 4 foot bales weighing up to 1500 pounds. The arms are controlled by a 2 1/2 x 8 inch hydraulic cylinder. This pulls the arms in to spear the bale so the hay can be unrolled evenly and efficiently for feeding purposes.
This unroller controls waste and dead grass in the pasture by moving round hay bales to different spots for feeding. Livestock will move and not trample the grass at the same place every time hay is fed. This unit is equipped with a 2 ½ x 8 inch hydraulic cylinder with hoses & couplers. The bale unroller is equipped with both the category I and II three point hitch. Free Shipping within 1,000 miles!
Model Number: ETA 4 Bale unroller
Style: Narrow round bale unroller 3 point
Hi. I'm Ted. We're here with another attachment made by Everything Attachments, here in our house. This is a bale unroller, 4 to 5; this will do from 4 to 5-foot width bales for your round bales. Just as much as you need them during the winter when the grass isn't growing, we're selling a lot of them because of the drought, and the grass just isn't growing during the summer. Either way, whether you need it during the summer or the winter, we've got them. We've sold them from a couple other manufacturers, and we just can't seem to get them when we need them, so we've started making them ourselves. Ours are going to come with the cylinder and the hoses and couplers ready to go to work with your tractor. These are 5-foot hoses on each side, comes with the ½-inch agriculture-style coupler on them, so that should be universal to almost every tractor. This will work on a Category 1 or Category 2 tractor. On these spears here, we've angled the spears to make them easy to penetrate the bale. We've added the 4 little pointed hooks here to keep the bale intact, and where you can put the pressure to it, stick them in, and it's going to let it roll evenly. Also, it's greasable right here, for your spindle. In here, we reinforced the main bushing that's in the end of this. When you've got a heavy 1,500-pound bale on the end of this and you're going through the field with your terraces and so forth, or up the road, there's a lot of force created down on these bars here, so we've reinforced this with 2-3/8ths plates that are wrapped around the bushing, that goes from top to bottom on the inside of this, that's 4 inches in length. Then it has 1¼ inch pin that goes down through here to give it more strength. All this box is made of ½-inch steel and welded together to give it all the strength it can so you're not bending any of this. As you can see, the part that goes onto your tractor, this is your Category 2 pin, which is 1-1/8th inch. If you were putting this on a Category 1 tractor doing smaller bales, you would remove this pin here and use this inside pin, which is your standard 7/8ths pin for a Category 1. For the top link, you've got 3 different holes; these are all Category 2 holes. You could use a Category 1 pin in it if you need to. Depending on where you put your top link for your particular tractor and for what you're doing, from the top to the bottom is going to determine how much that it angles as you lift it. You can set it where it'll lift almost square, or you can set it to where it's going to lift higher, if you're having to get them off a small [inaudible: 03:03] truck or something like that. If you can kind of see right here, what makes this stronger than any of the other bale movers that I know of, and it's expensive to do, but this is 2- inch x 4-inch pieces of steel tubing, which is ¼-inch thick, and then it's welded together kind of like a laminated beam. It's twice as expensive to build this way, but it's twice as strong. Then there's 2 different adjustment holes, whether you're doing 5-foot bales or 4-foot bales. Cylinder comes with it, hoses come with it. It's ready to go when you get it. It weighs 350 pounds, so it will have to come motor carrier. Just remember Everything Attachments does free freight for 1,000 miles from Newton, North Carolina, on all their attachments. If you need any help sizing this, we also have this same bale unroller in a 5 to 6-foot, it's just wider, and you'll see that coming out soon. If you've got any questions about sizing it or for your tractor, just give us a call or email at Everything Attachments. We'll be happy to help you.
Phoenix Tractor Finish Mower 72", Rear Discharge
Agrex Tractor PTO Fertilizer Spreader XA250
Phoenix T5 Series HD 44" Tractor Rotary Tiller
Fred Cain Field Cultivator With 15 Shanks
Phoenix Tractor Finish Mower 60", Rear Discharge
Share your knowledge of this product with other customers...
Be the first to write a review
Send Us Feedback
Copyright © 2009 www.everythingattachments.com. All Rights Reserved.
Skid Steer Attachments, Tractor Implements, Excavator Attachments for Sale - Order Online