Home > Manufacturers > WR Long >

W.R. Long Wear Blades
W.R. Long Tractor/Skid Steer Bolt on Wear Blade
71" wear blade shown


 
Alternative Views:


W.R. Long Wear Blade for Tractors & Skid Steers

Wear Blades "WB" are for Farm, Compact, Light Industrial, and Skid Loaders with lift capacities up to 3,500 pounds and come in widths from 44 to 84 inches. The wear blade fits over the top and bottom of the cutting edge of the bucket and is secured by only 2 bolts. These are custom built tooth bars that ship on average in 4 weeks. Please provide the exact inside wall to wall measurement of your bucket for proper fit.



W.R. Long Wear Blades for 44 to 92 inch Tractor or Skid Steer Buckets. Free ground shipping to your door within 1,000 miles!


Item# Item Name Our Price Qty Add
WRL-WB-48 W.R. Long Wear Blade for Buckets Between 44-1/8 and 54 inches In Width
$466.50
WRL-WB-62 W.R. Long Wear Blade for Buckets Between 54-1/8 and 64 inches In Width
$480.92
WRL-WB-70 W.R. Long Wear Blade for Buckets Between 64-1/8 and 74 inches In Width
$442.26
WRL-WB-80 W.R. Long Wear Blade for Buckets Between 74-1/8 and 84 inches In Width
$455.13
WRL-IWB-78 W.R. Long Industrial Wear Blade for Buckets Between 69-18 and 79 inches In Width
$602.56
WRL-IWB-84 W.R. Long Industrial Wear Blade for Buckets Between 79-1/8 and 89 inches In Width
$617.20
WRL-IWB-90 W.R. Long Industrial Wear Blade for Buckets Between 89-1/8 and 99 inches In Width
$631.62
Check the items you wish to purchase, then click


More:
Step 1
Step 2
Step 3
Step 4
Step 5



Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 April 17, 2019
Reviewer: Wade Barton from Berlin, PA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 W.R. Long products built to last September 6, 2017
Reviewer: JEFF B from OWINGS, MD United States  
Had the same wear bar on another FEL. Really saves wear on the bucket. I gave specific dimensions and was still made a half inch shorter as requested.  No worries though nothing that a couple of washers couldn't take care of!  EA Response: We ask for the exact inside width and it is made somewhat less wide to ensure fitment with a little room for error.  The ears are able to draw out on either side, but it sounds like the washers work for you as well.  Thanks for the business!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent wear bar March 2, 2017
Reviewer: Tim C. from Wilder, ID United States  
Fit perfectly on my kubota bx.   Easy to install.   Thanks for the great product and service!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 Wear bar for Daniel Morin September 21, 2015
Reviewer: Daniel Morin from Ware, MA United States  
I like the wear bar. Heavy Duty, and I like the way it bolts on.
I have already covered this subject, but once more.
It came with a crooked attaching arm which did not allow me to bolt it on as is. This did not happen during shipping, nor here at my house.
I had to hit the left attaching arm while in a vise, with a sledge hammer, a dozen times to move the arm 1/2 inch so I could bolt it on my loader.
The front bar dimension is 60 5/8, the attaching arm area was 60 5/16. I had to move that dimension to 60 3/4.
ETA Response: The attaching brackets on the custom built wear blades are made narrower than the bucket so you have room to slide them inside the bucket.  The brackets will draw out until they are flush with the bucket as you tighten the bolts.

Was this review helpful to you?