Home > Browse by Industry > Lawn Care >

AgriMetal Multi-Vac 772 Lawn Leaf & Debris Vacuum PTO Driven
AgriMetal Multi-Vac 772, Leaf & Debris Vacuum, PTO Driven
AgriMetal Multi-Vac 772, Leaf & Debris Vacuum, PTO Driven


 
Alternative Views:


AgriMetal Multi-Vac 772 Lawn Leaf & Debris Vacuum PTO Driven

Standard Flail Finger Rotary Brush. A greater holding hopper capacity with AgriMetal Multi-Vac series. The Multi-Vac series has 12 fixed knives installed just before the impeller housing, two rotary blades turning at high speed to shred leaves & branches and a third rotary blade located inside the pick-up head throat to eliminate any clogging. This exclusive internal shredder greatly increases the volume of debris that is packed into the hopper.


The benefits of this exclusive design are:
  • To prevent the operator from having to stop and unclog the pick-up head
  • It allows a much longer time between trips to the dump site
  • Free shipping within 1,000 miles!

Our Price: $43,060.00


Product Code: AGR-MULTI-VAC-772
No Longer Available

Description
 

Multi-Vac series

Model 772: 7 cubic yard hopper / 72’’ pick-up head.

New brush system

AgriMetal has developed a new brush system that is second to none in sweeping leaves and branches. The brush is made of 3/8’’ wide high-strength nylon fingers with shorter steel knives located between the nylon fingers. The nylon fingers and steel knives are made to freely pivot so as not to damage the turf, while throwing leaves and branches into the intake.

Hydraulic dump system
A hydraulic dump system is used to empty the debris from the hopper. The hopper tilts up to a 60 degree angle to completely empty the box. This system is quick and efficient allowing the operator to return to the field, thus maximizing productivity.

Exhaust
The exhaust of the Multi-Vac series expel the vicious air at the bottom of the rear door, directing the dust straight to the ground.

Control pick-up head from operator's seat
The pick-up head lowers and rises hydraulically from the operator’s seat.As the operator lifts the pick-up head, the front raises first which allows to vacuum thick piles of leaves. The pickup head rides on 4 large rollers to eliminate marking, compacting and scuffing fairways.

Optional slicer kit
An optional slicer kit can be attached to the Verti-Tatch head. Slicer blade follow the same path as the Veticut blades for deeper penetration. (1 inch x 1 ¾ inch deep) The Verti-Tatch head equipped with a Slicer kit allow you to: de-tatch, collect & aerate fairways all in one pass. This multi purpose pick up head becomes a cost efficient investment because of its year-round use and multiple application. Only 15 minutes is required to switch pick up heads.

Suction hose
An optional 16 foot commercial suction hose is available on all models.

May be replaced with a Verti-Tatch head
The standard vacuum head of the Multi-Vac may be replaced with a Verti-Tatch head to de-thatch & pick-up debris all in one pass. (spacing 1 ½ inch cc.)

Platform for safe and proper clean out
A platform located around the blower housing enable the operator to safely & properly clean out the inside of the blower. A drain trap is located at the bottom of the blower to drain water and residues. Once the hopper is tilted, it is quick and easy to wash out the inside.

Low Ground pressure
2 sets of wheels, mounted on walking beam axles to ensure low ground
pressure and eliminate scuffing in tight turns.

Front roller height adjustment
The front roller height adjustment is easily done without the need of tools.


Share your knowledge of this product with other customers... Be the first to write a review