Equipment Financing Provided By
Join our mailing list!
Hi, I'm Ted from Everything Attachments and we're with the Bradco Skid Steer Stump Grinder. This is the SG26, and the 26 stands for it's a 26 inch diameter wheel that's on this. This is the only one that's offered in low flow.
This would work from 16 to 22 gallons. I always prefer to be a little bit, at least somewhere on something like this, I like to not be right at the edge of the very bottom number, like 16. 18 and up would run it great. 16 will run it, but the performance, you will be able to tell a little bit of difference. Because this is totally hydraulically run.
All of the functions, like the 60 degree swing and the up and down are done through this electric over hydraulic control, so you'll be able to operate this from your machine, or standing over the the side is even better where you can really see what you're doing while you've got someone in your machine with a cab door on it, because this does throw a lot of debris.
This valve under here is your electric over hydraulic valve. Skid steers basically come with just two lines and they will go either direction, like to open a four-in-one bucket, but this has many functions. It turns the wheel. It lowers the wheel, and it angles the wheel. So through this electrical box, you're able to control that valve and do the different functions while it's running with only two lines with your machine.
Now this is the shark style tooth, which I prefer the best because of the way it goes on and just how heavy duty it is. They also make it with a square tooth, which would have a square pocket welded in here that this tooth would slide into, and then there would be a nut behind it. So this is the other option that is offered on our website. It works fine. This is just what I prefer.
There's a nice step here and there to be able to get into your machine. Heavy duty skid steer mount. The way we've got it priced on our website, it comes with the hoses and couplers. And they've got the big heavy duty flat faces on it.
This will allow you to grind ten inches below the ground, so you'll be able to fully clear the stump below the ground so you can fill it up with dirt, so you can still grow your grass over the top of the stump.
So for the right choice of a stump grinder for your skid steer, the most important thing is probably the flow of your machine. If you'll give us a call or an email, we'll be happy to help you make sure that you get the right stump grinder to match the flow you have for your machine.
If you have high flow hydraulics, then they also offer a 30 inch wheel and you will have three lines with a high flow unit and can go all the way up to 40 gallons per minute. So give us a call or an email and we'll help size these units for you.