Video Transcription:
Hi, I'm Ted from Everything Attachments, and we're showing you the versatility that the Bradco frame for the pallet forks can have.
If you've got a set of Bradco pallet forks or are going to buy forks and need other attachments you might want to consider this being a universal attachment.
They make this bale spear. This is the double bale spear. They make a triple bale spear with two bottom spikes. They make a hydraulic auger cradle. And they make a trailer hitch receiver that will all go on the Bradco pallet fork frame.
So this installs just like a fork would, and we'll show you a picture.
In the center of this, the way you install a fork directly in the center, there's a notch cut out in the bottom. So you hang a fork on the top, let the bottom go in for the cut out, and then slide it to the side and it's locked in.
It's the same way with this. You just set it on the top. Let it go into the groove. Push it over to the side. Put your pin in one of these grooves. You could use it offset if you wanted to. This frame would work on any skid steer with a universal hitch or a farm tractor loader of any kind that has the universal hitch.
But this bale spear, it just makes it real easy to have a lot of attachments like the bale spear, the auger, and so forth, the receiver, and be able to store them in a small area inside instead of having to leave all these big attachments outside.
Plus it's cheaper to buy it as these little attachments to fit your main frame instead of buying the complete units.
But this is a neat attachment. It's a neat way of doing it and saving space.
If you've got any questions, just give us a call or an email at Everything Attachments, and we'll be happy to make sure you get the right attachments for your job.
| 
I like the design of these forks. 
