More:
 |
 |
COMPACT X-TREME DUTY 4-in-1 Multi-Purpose Bucket
Model |
# of Teeth |
Width (in) |
Headed Capacity (cu ft) |
Max Clam Opening |
Product Weight (lbs) |
1MPCMP54 |
0 |
54" |
7.66 |
29.5 |
568 |
1MPCMP54T |
5 |
582 |
1MPCMP54E |
0 |
606 |
|
|
|
|
|
|
1MPCMP60 |
0 |
60" |
8.58 |
|
592 |
1MPCMP60T |
6 |
609 |
1MPCMP60E |
0 |
635 |
|
|
|
|
|
|
1MPCMP66 |
0 |
66" |
9.49 |
|
616 |
1MPCMP66T |
6 |
633 |
1MPCMP66E |
0 |
663 |
|
|
|
|
|
|
1MPCMP72 |
0 |
72" |
10.4 |
|
640 |
1MPCMP72T |
7 |
650 |
1MPCM P72E |
0 |
701 | |
Video Transcription:
Hi, I'm Ted from Everything Attachments and we're here today with the Construction Attachments brand of compact four-in-one bucket.
This is their newly designed four-in-one bucket to give it a much more opening space. The old bucket didn't have as much space as we wanted when you opened it so the new bucket opens to a full 29 1/2 inches from the cutting edge to the back cutting edge when it's open to give you a lot more grabbling room and a lot more back dragging room when you're backing it up.
So we've added a, we've increased the opening considerably to 29 1/2 inches. We've added a cutting edge here that can be reversed or be changed by bolts instead of having to weld it in.
There is a welded in edge in the back of this for your back dragging.
All of the buckets are going to come with a pre-drilled hole with the recessed in here so you can add a reversible cutting edge or the bolt-on teeth at your convenience.
It has extra gusseting in here to make this strong. And this is a two layer piece of metal.
So you can see that the bottom of the bucket is bowed here and that's what's giving it strength because it's a double ply. And then they've added the extra piece here where the grip is to give you some extra strength if you're doing some large brush and so forth.
As you can see, this hitch plate has been extended out to put the main load down on the bottom where this extra piece is broken into the main hinge plate. It's on some angle here so for a tractor loader, it's going to give you plenty of curl back instead of being flat.
It also spreads the load out on the push on this bucket to make it a heavier duty bucket.
All the hoses are routed underneath the hitch plate so you won't be getting into that.
It comes standard with half-inch ag couplers, has heavy duty cylinders where they're protected here from your hoses.
It is a USA-made bucket, made here in North Carolina. Construction Attachments makes the best skid steer, and now the best compact tractor attachments on the market.
We hope you'll make all your purchases at Everything Attachments. Give us a call or an email and we'll be happy to make sure you get the right size bucket for your tractor.
|