Hi, I'm Ted from Everything Attachments and we're here today with the Bradco pallet fork frame.
This is the same frame that will take the pallet forks. You simply, on the bottom, underneath this you have a notch cut out about the width of a fork, about four inches. And the way you would install a fork, you would hang it on the top, let it go into the groove, which is right under here and we'll show you a picture of that. And then slide it to the side and lock your fork in any of these lock-in notches.
This is the same way. They make a trailer receiver. They make a hydraulic auger cradle attachment where you can hook your auger to it. They make two bale spear attachments. And so it makes it to where you're able to use the same frame for multiple uses.
This just simply hangs on the top. Put it in the groove, slide it over a couple of inches. Put your pin in. You can put it anywhere you want for any particular reason that you need.
This is a class three receiver, like would be on the back of your truck.
You simply take the pin out, stick your receiver in, whether you're using a two inch, two and 5/16th, a clevis hitch, whatever you're using, it makes your skid steer or your tractor loader that has a universal skid steer attach really versatile to do a lot of things without spending a lot of money, and making it be able to store a lot of tools in a small area instead of needing all these complete frame sets sitting everywhere.
So we have the other tools we'll be showing you here shortly with this frame set.
If you have any questions about the options that you can do on your Bradco pallet forks, give us a call or an email at Everything Attachments and we'll be happy to help you.