Home > Manufacturers >

Shaver HD-8 Tractor Post Driver, Manual Tilt, 3 point Hitch Category 1
Shaver Post Driver - Model HD-8
Shaver Model HD-8 Tractor 3pt Hitch Hydraulic Post Driver, Manual Tilt
 
Alternative Views:

Shaver HD-8 Post Driver - Manual Tilt - Category I 3 point Hitch

This tractor mounted post driver delivers 30,000 lbs of pressure on it's full down stroke! Made to drive up to ten foot posts into the ground in less than 20 seconds, the Shaver HD-8 Post Driver is a must have attachment if you are putting up or maintaining a lot of fence line.

This model Shaver Post Driver is designed to fit your category 1 Tractor 3 point hitch. Shaver Drivers are fast, powerful, rugged and reliable. Everything Attachments believes that "Made in the USA" Shaver post drivers are known as the world's finest. They're built to heavier standards than the job requires. These tractor 3 point post drivers function using only six moving parts. The Shaver post driver machines perform year after year to tackle all your fencing needs.

All post hole drivers come with 1 stand, which is the industry standard, but at Everything Attachments, we include a second stand because we feel it has less of a chance of falling over with two legs.


  • Hoses are included with all post drivers.
  • Couplers not included.
  • Spring loaded retractable post holder is included with all models.
  • Some Assembly Required
  • Price with Hydraulic base is $5,465, complete with hoses, no ends or couplers.
  • Optional: Plug Package for tractor with closed center hydraulics
  • Operator's Manual
  • Free shipping within 1,000 miles!
Our Price: $3,581.25



Product Code: SH-HD-8-MAN-TILT

Plug Package

Plug Package for tractors with closed center hydraulics [Add $156.25]

No Longer Available  
Description
 
The HD-8 Shaver post driver shown above has the manual angle tilt of 15 degrees either direction to make sure you drive your posts straight, and delivers 30,000 lbs at full stroke force and can drive 4-5 inch posts in less than 15 seconds. All models take just a few minutes to mount or detach. All work with any 3-point hitch, with or without Quick-Tach. Shaver post drivers can be mounted on tractors or skid steer loaders.
Shaver Hydraulic Post Driver
More
Features and
Specifictions		 HD-8 HD-10 HD-12H
Impact at Full Stroke 30,000 lbs. 71,500 lbs. 100,000 lbs.
Effective Weight of
Spring Powered Hammer		 360 lbs. 725 lbs. 1,100 lbs.
Drives a 4-5" post in as little as 10 seconsds.
Operating Distance
Above Ground		 53-126" 53-128" 53-128"
Operating distance above ground is adjustable on all models.
Post Size:
Maximum Width
Maximum Length		 Drives steel, wood posts, railroad ties
7 1/8"
10 feet		 8 3/4"
10 feet		 10 7/8"
10 feet
No. of Block Studs 4 4 6
No. of Nyrim Blocks 4 4 6
Tilt:
With Hydraulic Base
With Manual Base Plate		 Front-back/side-side
15°/15°
15°/15°		 Front-back/side-side
15°/15°
15°/15°

Front-back/side-side
20°/25°
N/A

Hydraulic Base Plate and
Manal Stabilizer Pad
pkg.		 optional optional optional
Category I, II, or III
Assembly		 category I category I category II
Adjustable with all models 25.0" - 40.5"
Mounting front or rear or skid ldr. front or rear or skid ldr. rear or skid ldr.
Whicever you shoose, it takes just a few minutes to mount or detach. Works
with any 3-point hitch, with or without Quick-Tach
Hydraulic Requirements 3-4 GPM/1,500 PSI 12 GPM/1,500 PSI 15 GPM/2,000 PSI
Shipping Weight:
With Hydraulic Base
With Manual Base Plate		 (Weights listed are approximate)
486 lbs.
438 lbs.		 714 lbs.
694 lbs.		 957 lbs.
N/A

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 9 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 June 8, 2022
Reviewer: Irvin Lange from Clinton, IA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Review May 25, 2022
Reviewer: Scott Kelly from Browerville , MN United States  
Your sales people are always good. Wish they would have told me about the drain line fir the unit just so I had a heads up. I have not used the unit yet but will in the next two weeks. Assembly was pretty simple. I think you need to put Kevlar wrap on the high pressure hoses before shipping. You should not have high pressure lines next to a operator with out burst protection. Other then that it looks good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Shaver HD 8 May 19, 2022
Reviewer: William Dunn from Mechanicville, NY United States  
The unit so far works good. The shipping needs to be thought out. Boxes where all ripped open the unit was only held on with one strap and the paint is rubbed of in many locations!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice! March 2, 2021
Reviewer: Daniel Meeks from Middleburg, FL United States  
Shipping and assembly was pretty easy. The driver works great, I’m driving 4x4x6 and 6x6x8. The only issue was the return line must go to the hydraulic reservoir so for my tractor I had to have a machine shop custom make the fitting.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 4, 2021
Reviewer: Mark Slaba from Arcadia, FL United States  
this is a great time saver works great! Have driven 6" x 8' posts with no problems.

Was this review helpful to you?

View All Customer Reviews