Home > Tractor Disc Harrows >

EA 48" Compact Tractor Angle Iron Disc Harrow

XTreme Duty 48" width Compact Tractor Angle Iron Disc Harrow
Compact Tractor Angle Iron Disc Harrow


 
Alternative Views:


Everything Attachments XTreme Duty Compact Angle Iron Disc Harrow

Small tractor owners often have to settle for lower quality products, but we see things differently. The EA Compact Tractor Angle Iron Disc Harrow is the best on the market for small compact and subcompact tractors. Instead of using weaker, "off the shelf" angle iron like everyone else, our frame components are formed by hand in our NC Factory. This harrow features roller bearings instead of friction bearings and has gussets to strengthen bends in the steel. This is a disc harrow unlike any other. It is truly designed to last a lifetime.


  • Proudly Made in the USA!
  • Premium A572 Grade 50 Laser Cut Steel Construction.
  • 12 discs on all models.
  • 16 or 18 inch discs available.
  • 21 degree angle on front and rear gangs.
  • Strong, maintenance free roller bearings on all discs.
  • Creased opposing face hangers for extra strength.
  • Roller bearings on all discs.
  • 48" cutting width.
  • Weighs 342 lbs. with 12 18" discs.
  • Everything Attachments Product Warranty
  • Free shipping within 1,000 miles!

360 Degree View Click Here for 360 Degree View




American Made Attachment
Everything Attachments XTreme Duty 48" width, Compact Tractor Angle Iron Disc Harrow with 16 or 18 inch discs. 21 degree angle on front and rear gangs.


Model Cutting Width (in.) No. of Blades Blade Diameter Weight
XDCMP-12-16-N-DISC 48" 12 16" 320 lbs.
XDCMP-12-18-N-DISC 48" 12 18" 342 lbs.


Everything Attachments Xtreme Duty Compact Angle Iron Disc Harrow
How To Disc Your Garden With A Kubota Tractor
Item# Item Name Our Price Sale Price Qty Add
ETA-XDCMP-12-16-N-DISC Everything Attachments Xtreme Duty Compact Angle Iron Disc Harrow with 12 16 Notched Discs
$1,532.97
$ 1,336.00
ETA-XDCMP-12-18-N-DISC Everything Attachments Xtreme Duty Compact Angle Iron Disc Harrow with 12 18 Notched Discs
$1,571.98
$ 1,372.67
Check the items you wish to purchase, then click


Extended Information:

Hi. I'm Ted from Everything Attachments and we're here today with our own disc harrows built in-house. Even though it may look pretty similar to an angle iron disc, which it is, it's made a lot different than any of the angle iron discs I've seen before. Our trademark is quality by design and we have put a lot of design into this.

I've tried to think of everything I could to keep it light for the little tractors, like the BX Kubota's and the subcompacts all the way up to the 30 horsepower B series or the small tractors that have a lot of horsepower. To start with, the angle iron that we used is not actually bolt angle iron. Everything is cut with every end piece to where it fits perfectly into these channels and it's cut on our Whitney. It looks like a regular disc to start with, but it just has so many things in it that I'm going to go over the features one by one with you.

Most of the angle iron and everything is a quarter inch in thickness. The front hitch and the angle pieces that go up to your top link are 5/16. The rear bar going back to the back is 5/16. There may be one out there, but I've never seen a subcompact disc or a disc with as little as 12 blades on it that has the actually roller bearings which most people use in their higher quality tube framed disc.

Every disc harrow we make, we're making four different models which make up over a thousand different combinations depending on the blades - round, smooth, notched, how many are on it. There's a ton of combinations with every disc harrow that we make, but we are putting the roller bearings on every one of them instead of the friction bearings.

Friction bearings are basically cast iron pieces that have several notches on it with two pieces that clamp over it. There's no bearing about it. It's simply just grease in there and metal turning against metal. It's a lot better than nothing, but the greased true roller bearings are the best. We even use those on our small disc harrows.

To start with, the angle iron that angles this way is in there for a reason. The hanger that we put underneath here... I'll show you that in a minute. The way we made it, instead of just a flat piece of metal which just about everybody uses, this is a formed piece of metal in our press break. It's all cut out perfectly with a CNC machine and then we form the sides of it to make it really strong, because every time you crease a piece of metal, it makes it stronger.

Just like this, if it was flat, it wouldn't be near as strong as if it were bent there. We've made some special bearing hangers that make this up. We've put this behind our 45-horsepower bobcat which has weighted tires, a full loader on it, went to the field, got it deep in the dirt, turned left and right with it in every direction, and we couldn't tear it up. We think it's good for everything that it was sized for correctly.

What's really unique is this angle is this way and this angle iron is this way, which I've never seen one that way. The reason is so the hanger underneath, where the angle of these hangers are - this is the flat piece and then these are the two inside pieces - the way it works is, because we turn the angle opposite directions - and that creates a lot of designing problems, but we worked it all out - you see the angle irons are going in opposite directions which I've never seen before.

It makes everything twice as strong when you put these types of bearing hangers on here. You can see that the bearing hanger has a formed piece on each side over an inch thick, giving you extra strength with the nice roller bearings, all the cast iron assemblies. This is a disc harrow that is meant to last for a long, long time.

One bearing holder keeps it rigid one way. The other bearing holder keeps it rigid the other way, making the whole assembly fully rigid in both directions. I've never seen that, but it's what really needed to be done to make it what I think is the best. Having the true roller bearing for a small disc trying to keep the weight down for a subcompact, I think we've really hit on something.

You can get a 16- or 18-inch disc on this model. It's 12 of them, where we do our bends back here. They have welded gussets under the seams here on both sides and then we form this piece of quarter to put across the whole top. This piece is cut out to fit the quarter so you get good pull from both sides. You've got your main brace going up to give your strength for your top link. You can see right here from the back what I mean by the formed pieces, because you see the thickness there - it's not just a flat piece of metal.

We've put a lot of thought into this. I've worked on this thing for three days in the design, changing it, moving things around. Then we built one with the angles on both sides, decided how much stronger we could make it if we put the angles in opposite directions, scrapped the first couple of prototypes, and just basically started over until we got it the way I wanted it. This is the way I want it. I think it's the way you'll want it. I think it's the best disc harrow on the market for this size of tractors. It's priced reasonable, freight to your door if you're within a thousand miles of us. We put a good automotive paint finish on it and it comes completely assembled.

Now this is one model that you will have to put in the two pins. I've seen every kind of combination. The cheap way of doing the axles is simply to use a piece of square bar, weld a plate on the end of it, and that's the way most of them are made. We are using a forged axle which is the strongest with a cast iron end plate on it. Every bit of this costs more money, but we're able to sell it to you at the same price we are the discs that we're selling currently by other manufacturers simply because we're making it in-house.

With Everything Attachments, with all the engineering that we've put into this, quality by design means so much to us that we just want to stay on top of the leading edge of what even the big manufacturers. You know the names. We want to be better than them. We want to be more price-conscious than them. We want to get it directly from the manufacturing plant, which is us, to you, the customer, where you get the best product for the best price. If you've got any questions about sizing this for your tractor, give us a call or an email and we'll be happy to help.




Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 26 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Worth the wait August 28, 2023
Reviewer: JAMES WEBER from LOXAHAPCHEE, FL United States  
Great price quality product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 TDD July 11, 2023
Reviewer: Terry Deskins from Canal Winchester, OH United States  
Nice implement, glad it’s American made. Extremely disappointed in the delivery charges will be hard pressed to order anything else due to the cost of my delivery.  

EA RESPONSE:  Rather than choosing for us to ship free to a business, or to the nearest freight terminal, this customer chose the $110 delivery option, which took the chunk of USA Made steel to his home.   Some prefer this, and the fee isn't really bad, considering it traveled hundreds of miles and the freight carrier arranged delivery and notified him of their expected arrival time.  Everything is very clearly laid out on our Free Shipping Info page, so no surprises, and someone from EA called to discuss this after the online order was placed.  Thanks for the business.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 4 ft. Disk March 29, 2023
Reviewer: SCOTT CROTTY from HILLMAN, MN United States  
Disk looks to be very well built disk. Very pleased with my purchase. Very proud to buy American made product. Can't wait to use it this Spring in Minnesota.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 No Surprises November 15, 2022
Reviewer: Clare Snyder from Johnstown , PA United States  
This is the third piece of equipment I've bought from Everything Attachments unfortunately the first disc harrow I bought was lost in a barn fire. I knew where to buy the replacement !!! Everything Attachments !! I know that when I purchase equipment From Everything Attachments I'll receive top quality and excellent service and they stand behind their products.  Thankyou C. Dean Snyder

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Disc Harrow April 27, 2022
Reviewer: Patrick Wyeth from Chino Valley, AZ United States  
Order my disc harrow back in December and it arrived in the middle April. Put it to work on my Kubota bx23. It is a 4 ft haro and it works great. The tolerances are tight for chewing up the soil, very happy with the workmanship, the welds are good and the material seems solid with good weight to it so it stay down. When I spoke with customer service to order it they gave me good advice. I thought about going to a larger one but with the size of my tractor 4 ft works really good especially when turning corners and getting into tight spaces.  I would go back to Everything Attachment again.

Was this review helpful to you?

View All Customer Reviews