Home > Manufacturers > WR Long >

W.R. Long Front Blade Manual Angle For Tractors and Subcompact Tractors up to 50HP
Front Blade Manual Angle For Tractors

Alternative Views:

W.R. Long Front Blade for Tractors and Subcompact Tractors Up To 50HP

The Front Blade is for Subcompact and Compact Tractors up to 50 hp and is used for pushing snow, sand, dirt, manure, gravel, etc. We can build your front blade with most any type quick attach or pin on connection for no additional charge.

The Front Blade comes in 60", 72", and 84" widths and angles up to 30 degrees to the right or left. A manual front blade is available with 5 positions; straight, 15 degrees left or right and 30 degrees left or right. When the blade is angled to 30 degrees the 60" blade has a usable width of 52", the 72" blade has a usable width of 62" and the 84" blade has a usable width of 73".

  • Replaceable cutting edge 1/2" thick by 6" wide and reversible
  • Skid shoes prevent gouging by maintaining the blade at a preset height.
  • Blade height is approximately 22"
  • 10 Gauge Steel
  • Spring trip blade design so that blade pivots when it hits an obstruction.
  • Radius dozer cutting edge available.
  • Polyurethane cutting edge available for snow removal.
  • Easily add cylinders and hoses to manual blade to convert to hydraulic blade.
  • Free shipping within 1,000 miles!

If you also want an optional poly edge on this scrape blade, enter the number of feet beside the poly edge option below, this will include the mounting hardware required and the bolts.

Model Width at 30 Degrees Weight in Pounds
FBM 60 52" 320
FBM 72 62" 345
FBM 84 73" 380
FBM 96 83" 405
W.R. Long Front Scrape Blades with Manual Angle.Free shipping within 1,000 miles!

Item# Item Name Our Price Qty Add
Long-Front-Blade-FBM-60 Front Blade Tractor Loader Scrape Blade 5 Manual Angle
Long-Front-Blade-FBM-72 Front Blade Tractor Loader Scrape Blade 6 Manual Angle
Long-Front-Blade-FBM-84 Front Blade Tractor Loader Scrape Blade 7 Manual Angle
Long-Front-Blade-FBM-96 Front Blade Tractor Loader Scrape Blade 8 Manual Angle
FT-POLY-EDGE Per foot of poly edge must match blade width
Check the items you wish to purchase, then click

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 heavy Duty. Very Impressed February 14, 2020
Reviewer: Arthur Kallenbach from Fridley, MN United States  
I bought the 6 ft manual angle for my JD 3025. This unit is very heavy duty.  I've used it twice and it works great.  Trip springs are perfect for this size.  It's heavy enough to use the "float" function on my loader.  There's enough down pressure from the weight of the blade to scrap the driveway.  Back dragging works as expected.  Very happy with the purchase.  I could have gone with a 7' wide blade but kind of happy I didn't.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 w.r. long front blade manual angle 8' March 25, 2019
Reviewer: Anonymous Person from Boonville, MO United States  
I got my new blade the day before the last snow storm in my area and  plowed my gravel road with ease.  I love it.  You can buy this blade  with confidence as it is well made and sturdy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 WR Long front blade December 20, 2018
Reviewer: Jeffrey Rydel from Norfolk, CT United States  
This thing is a beast, built to last for many years of hard use. I have only gotten to use it a couple of times for snow but it is by far the best made I have seen.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Plow is great fit was not January 2, 2017
Reviewer: James McBride from Cincinnati, OH United States  
Plow quality/design is great but fabrication had issues as the spacing where the tractor arms grasp the pins on the plow was to wide.  As a result, the holding pins would not fit through their holes because the pins that fixed the plow to the tractor loader arms stuck out to far.  Had to grind down the holding pins to half their thickness.  Don't think the holding pins are subject to any major stresses but now I have different sets of holding pins for my attachments .  Kind of a pain in the rear.  
ETA Response: This was a custom build for a pin on loader. The customer has an LA364 loader with a Kubota pin style quick attach that was designed for an LA504 loader, so there may be small inconsistencies between the two Kubota models.  Those inconsistencies most likely caused the poor fitment and made the tweaking necessary.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Excellent Experience December 25, 2016
Reviewer: Chuck Kalish from Pittsburgh, PA United States  
I did a lot of research before deciding to purchase a 7 foot snow blade with quick attach for my Kioti 3510 tractor from Everything Attachments.  I am more than pleased with the entire process.  The blade was shipped when promised to a local FedEx freight house.  The blade was securely strapped to a pallet and was quickly loaded onto a flat bed truck shortly after I arrived to take delivery.  Everyone that has seen the blade as remarked at the quality of the blade as well as how strong the blade is built.  I have a 1/4 mile driveway that curves through wooded property in Venango County, PA which is right in the lake effect snow belt.  I had the first opportunity to use the blade this week and it performed flawlessly.  Quick disconnect to switch out bucket and attach snow blade is a snap.  Very satisfied customer.  Thanks Everything Attachments for the excellent transaction experience.

Was this review helpful to you?

View All Customer Reviews