Home > Manufacturers > WR Long >

W.R. Long Pin on Tractor Loader Bucket to Universal Quick Attach Adapter
W.R. Long Pin on Tractor Loader Bucket to Universal Quick Attach Converter
W.R. Long Pin on Tractor Loader Bucket to Universal Quick Attach Adapter


 
Alternative Views:


W.R. Long Quick Attach Adapter for Pin on Tractor Loaders

W.R. Long Pin on Tractor Loader Bucket to Universal Quick Attach Adapter W.R. Long has always made quality attachments, and this is no different, Call or email today to Custom Build one your Tractor Loader.

The adapter plate is mostly made of 1/4. The pin on brackets all depend on the loader. They will either be , 5/16, or 3/8.


Not Included but Recommended: Weld-On Skid Steer Universal Skid Steer Quick Attach Plate

Use product code "quickattach" when ordering this item and a quick attach attachment to save $50


Our Price: $887.00

Product Code: WRL-APUM

Description Video Transcription
 

W.R. Long tractor pin on mount to universal quick attach adapter

Everything Attachments is proud to offer these pin on to universal quick attach adapters so any one can upgrade their tractor from pin on mount to universal quick attach we have drawings of over 750 tractors so it doesn't matter what tractor you have, we can fit this adapter to your specific tractor.

***Disclaimer***

There are a number of companies that manufacture front end loader attachments and with this variety of manufacturers there is also a variety of designs. The angle of the back plate varies from 30 degrees from vertical to 0 degrees from vertical depending on the manufacturer and attachment. W. R. Long has concluded that using a back plate angle of 10 degrees would be the best angle suited for most loader/attachment combinations.Based on the information above please check your attachment and your loader to make sure your attachments will hook up properly and have sufficient range of motion.

More

EA Fan Videos

QA Adapter and Bucket conversion(Kubota)

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 52 Write a review.

  0 of 0 people found the following review helpful:
 
1 of 5 Needed to cut and re-weld. December 3, 2019
Reviewer: Scott Granger from Millbury, MA United States  
This was supposed to be customized to my front loader. Measurements were taken specifically to make sure. When the adapter came in, one very important measurement was off. The top pin was supposed to be offset 2 inches forward from the lower pin. When I got the adapter, it wasn't offset. The lower pin was directly under the upper pin. The result is that the forks that I bought with the quick attach are not even with the ground when the loader is at its lowest point. My loader does not have enough rollback to account for the problem. I don't have the time or resources to send it back. I had to take it to a fabrication shop so they could cut, adjust, and re-weld.  EA RESPONSE:  Since the loader in question is very old, we requested a drawing to be filled out.  The customer supplied a drawing with all of the measurements.  WR Long drew it in CAD and we sent their drawing to the customer.  The customer, Scott, approved the drawing and it was built to the his specifications.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fit like Massey made it November 22, 2019
Reviewer: Bill Parlee from Dade City, FL United States  
I could have purchased another brand cheaper  but I felt it might not fit to well or be heavy  duty enough as they are mostly universal fit and I didn't want to have to deal with modifying it to fit my tractor, the reviews on this adapter were very good. this thing fit like Massey made it, no problem, its heavy duty. just what I was looking for, glad I spent the extra $. I highly recommend this product!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Super stout and a perfect fit November 14, 2019
Reviewer: TOM RICE from MANSON, WA United States  
Just as advertised.  Very heavy steel plate construction.  Easy installation in just a few minutes.  Now I can quickly swap all my quick-attach implements.
This item showed up at my house sooner than expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Straight forward swap October 30, 2019
Reviewer: Bill Clark from Snohomish, WA United States  
Good fit

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 quick attaach m6800 kubota September 30, 2019
Reviewer: ROBBY ALLEN from Woodbury, TN United States  
Great fit and great service.

Was this review helpful to you?

View All Customer Reviews