Hi, I'm Ted from Everything Attachments. We're here today with our Compact Pallet Forks. These are rated 3000 pounds. This is also the same frame it's set for the spacing on the tines as we use on the bigger Compact Pallet Forks that are rated up to 3000 pounds. These are gonna be rated at 2200 pounds. Even though the steel is the same in the back and they would stand the 3000 pounds, the Forks are rated for 3000 at 20 inches from the bend so that's what we're gonna rate them for.
So this would be for any compact tractor or if you had a mini skid steer, we also have all the plates that we can weld on the back, to just about fit any of the mini skids steers. So these are a little over one inch thick, three inches wide. They do have the standard flip up clip just like a regular forklift has or skid steer forks, where you flip them up and they slide in your notches here. Now, the one thing different about this set of forks from the compact forks that we have been selling, normally skid steer forks and forklifts and stuff unless you get really big use of class 2 fork. And the only difference is how far the pockets are on the back side of the fork for the rails to slide on.
These are about five inches shorter. They're a class 1 fork instead of a class 2, so what we've done here, since we've used heavier steel, and wanna make one frame to be able to handle the 3000 pounds that would be on a bigger compact on these new mega compacts. So we've used a class 1 fork and the only difference is the same metal, same rating, it's just a shorter back. So that big thick metal is really heavy. So when we put the shorter one down there, we're able to recover some of the weight we've added into the frames because we want to keep them as light as we can for the little tractors. So this is a class 1 fork, and it's just five inches shorter. So other than that everything is the same. The frame is built a little heavier than normal because it's the same one we use rated up to 3000 pounds.
They come in a standard universal. They'll also come in the John Deere hitch, with the two pins on the side, with the clevis pins. And then any of the many skid steer hitches can be put on the back also. We also make them for the BX and a couple of the small Kubota loaders that don't come with a quick attach. We've put a guard down here with the vertical braces where you can see your load when you're unloading a trailer or something that's high.
We've made everything where it's indexed and so we get everything in the right location every time. And we sell a lot of compact pallet forks. So we're really happy to be building them in-house. We were selling some under the Everything Attachments name, and as it said in the ad, they were built in South Korea. Never had any problem with them. We made a few improvements like bevelling this edge here, makes it a lot easier to slide the fork back and forth. And it's made in America, and that's the best thing about it. We've actually been able to lower the price a little bit since we don't have to buy them from someone else. And we wanna give you the best product of all. That's what Everything Attachments is all about. So if you've got any questions, give us a call or an email. We'll be happy to help you at Everything Attachments.