Home > Browse by Industry > Tractor Construction Equipment >

EA 6900 Heavy Duty Tractor Post Hole Digger
Tractor Post hole digger 6900 HD for up to 18 inch auger
Everything Attachments 6900HD Tractor Post Hole Digger


 
Alternative Views:


Everything Attachments 6900 HD Tractor Post Hole Digger

The Everything Attachments 6900 HD Tractor Post Hole Digger is our best selling unit. It features a strong tubular hoop and boom for maximum long lasting efficiency. This Post Hole Digger is best on full size compact tractors for use with up to 18" diameter augers. The Heavy Duty 57 horsepower rated gearbox has tapered roller bearings and a standard 2" round output shaft. The heavier casing of the gearbox is designed not to use a guiding rod. The shielded, Class 4, Heavy Duty PTO shaft has shear bolt protection. The seven-position boom allows for adjustment to fit many category 1, 3 point hitch tractors. The augers are available in 6", 9", 12", and 18" diameter sizes. We have a video of How to assemble and install a three point hitch Post Hole Digger, scroll down to watch. Gear box is pre-filled with gear oil and ready to use.

6"-18" are heavy duty bits with 3/16" flighting offered by Everything Attachments. They are heavier and designed better than many augers in the industry.
****CURRENTLY IN STOCK FOR FAST SHIPPING****


  • Proudly Made in the USA!
  • Our BEST SELLING Post Hole Digger!
  • Designed for category 1 compact tractors.
  • Versatile inner and outer lift arm pin design.
  • Geometry and design maximizes lifting leverage.
  • Heavy Duty gearbox is rated for up to 57 horsepower.
  • All auger bits are 48" long except for the 4" auger bit.
  • 6", 9", 12" and 18" augers feature bolt-on, replaceable tips and cutting teeth.
  • Download Owner's Manual
  • View Warranty
  • Ships via FedEx Ground to your home.
  • Free ground shipping to your door within 1,000 miles!


360 Degree View 360 Degree View of Auger Bits

American Made Attachment

The shear bolt can ungraded or up to grade 2, for up to 12" auger size, if you choose to use an 18" auger, the grade 5 shear bolt is necessary for that much torque. As for the attachment bolts which attach the auger to the output shaft of the gear box, no problem with any grade bolt there, you can use up to a grade 5 there as this is only attaching the auger and not a shear point, only a hookup or attachment point for the auger.

Item# Item Name Our Price Qty Add
ETA-6900HD-6 ETA 6900 Heavy Duty Post Hole Digger with ETA 6 x 48 HD Auger Bit 214 lbs
$968.00
ETA-6900HD-9 ETA 6900 Heavy Duty Post Hole Digger with ETA 9 x 48 HD Auger Bit 224 lbs
$982.00
ETA-6900HD-12 ETA 6900 Heavy Duty Post Hole Digger with ETA 12 x 48 HD Auger Bit 237 lbs
$1,016.00
ETA-6900HD-18 ETA 6900 Heavy Duty Post Hole Digger with ETA 18 x 48 HD Auger Bit 259 lbs
$1,180.00
5-PINS-6900HD Set of 5 Extra Shear Pins w/ Purchase of 6900HD Post Hole Digger
$5.00
Check the items you wish to purchase, then click


Video Transcription:

Hi, I'm Ted from Everything Attachments, and we're here today with parts of the ETA, which is Everything Attachments, post hole digger. I just want to explain some of the things we've done for our own post hole digger and what improvements we've made and why there is a cost difference between an Everything Attachments post hole digger and a Leinbach post hole digger.

The Leinbach post hole diggers are great. We've sold a lot of them over the years. We've had trouble getting supply all the time of them, so just to keep our customers happy and to keep the supply line moving, we're producing our own augers in-house. And we've made a lot of improvements on them. They look similar, but we've made a lot of improvements and we just want to tell you what we've done and why these are costing more. It's not like I've just jacked up the price. You're truly getting what you pay for.

So we'll start with the gearboxes. This is an omni-gearbox, and yes, unfortunately, it is made in China. But most of the American manufacturers that have a good post hole driller line, and I'm going to try not to mention names because I would cover just about all of the manufacturers out there. But this box is on several different other companies, you know as a major manufacturer that also builds loaders and other components. And that box is rated up to a 24 inch auger. This is the smaller gearbox like would be on our Everything Attachments 6900 compact and the 6900. It's also an omni-gearbox and it's rated up to a 12 inch auger.

Now the difference between the Leinbach and the Everything Attachment drive shaft, Leinbach uses a class 2 shaft, which is fine up to 12 inches, and this is a class 4 shaft. It's good up to 24 inches. Now this shaft weighs 20 pounds more than a class 2 shaft. It's more expensive to ship, but you can't hardly tear it up if you wanted to, especially on the little digger. Now we're using a class 4 on the little digger just simply because when we buy in numbers and quantity we can buy one grade of a better shaft for the price of trying to manage two different grades for two different augers.

So we want to show you the difference in the auger, too. The Leinbach auger makes a good auger bit. They really do. They're a medium duty bit. Probably the biggest disadvantage is that when you wear out the tip where you're digging, you have to replace the whole head, which is about $30 or more, and then on these you would only have to replace just the tips. And actually is a better style of digging. And we're going to turn this around and show it to you.

OK, on the four inch bit, the problem with a four inch bit is it's only four inches and you got a real powerful gearbox here. So the four inch bit for right now is actually going to cost more than most of these bits. This is a Danuser bit. Because of the way it's built, it uses a small shaft, but to make it to where it has enough flighting on it to bring the dirt out, it has to be built like a brick house. It has a really thick tube, a really thick collar, has a good screw point on it, and it has the standard cutting edges on both sides. So it's hard to make a good four inch bit cheap. There's no real way to do it without it breaking and I've got quite a few broken cheap four inch bits around here. So we're just going to use the best bit I know of on the four inch.

On the six, nine and twelve and eighteen, these are bits that we got for Everything Attachments augers. They have a big nice long screw on the end, which is going to help start your hoe early. And then when you go to replace the tips, you only have to replace each point instead of the complete assembly. Now everything about these bits are just heavier, so they're more expensive for me to ship.

Now Everything Attachments augers will now come completely boxed in cardboard. We're putting a nice paint job on them. We're using heavier pipe, heavier tubing. They'll come encased in cardboard with that expanded foam to protect it, keep it from getting scratched from shipping, which is delivering. And we just want to give you a superior product at a great price. The price has gone up some, but you get what you pay for and I can guarantee you at Everything Attachments we're giving you all we can for the dollar. And we're keeping as much of this made in America as we can. All the booms and all were done and painted right here in this house. And if you'll give us a call or an email, we'll help size the right auger for your tractor and the right auger head and get everything right for you. Just give us a call or an email at Everything Attachments.




Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 74 Write a review.

  0 of 0 people found the following review helpful:
 
3 of 5 Can't use yet. October 31, 2019
Reviewer: Doug from Brookston, TX United States  
We have had so much rain that I would get the tractor stuck trying to just get to where I need to use the post hole digger.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 post hole digger October 29, 2019
Reviewer: John Ennis from Elko, GA United States  
I am totally satisfied with my post hole digger and thankful for the help with ETA on the help oh getting the right size for my tractor.  If I had one complaint, it was the backlog that EVA had on getting me the digger.  Which to be honest, wasnt really a big deal.  But if you need an immediate turnaround, there may be an issue due to their on hand supply at times.  Great company and great equipment.  I will buy from them again.  EA Response:  The wait time during the Spring of 2019 was gruelingly long, but our new facility has really upped our efficiency and build times are way down. As of 10-2019, all EA Post Hole Diggers are IN STOCK.  We will keep working hard and hopefully maintain inventory throughout the spring of 2020!! Thanks for the business!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Service and Implements! October 29, 2019
Reviewer: Philip Roberts from Albany, NY United States  
Good job guys. A pleasure doing business with you!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Post Hole Digger October 20, 2019
Reviewer: Rod Stipe from Mountain Rest, SC United States  
Very well made.
Good written instructions, and detailed video.
Assembled the digger on the tractor.
Made short work of some tough jobs on my Kubota L3901
Would definitely recommend buying the EA 6900 for this size tractor.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product October 19, 2019
Reviewer: Kurt McClelland from Morgantown, KY United States  
The post hole digger works great

Was this review helpful to you?

View All Customer Reviews