Home > Tractor Fertilizer Spreaders >

Farm-Max Tractor PTO Fertilizer Spreader SP-180 3pt Cat 1
Farm-Max Tractor PTO Fertilizer Spreader SP-180 3 Point Hitch Cat 1
Farm-Max Tractor PTO Fertilizer Spreader SP-180 3 Point Hitch Cat 1


 
Alternative Views:


Farm-Max Tractor PTO Fertilizer Spreader SP-180

All of the Farm-Max fertilizer spreaders are built of the highest quality materials. There is a large lever that controls the openings of the gate. The linkage can be adjusted for a 90-degree left or right spread pattern or a 180-degree pattern behind the tractor. The stabilizing bar in the middle of the hopper strengthens the spreader and distributes the weight of the load. The SP-180 model has a metal hopper, Stainless Steel Disc, and is 36" tall. It is PTO driven (includes the PTO shaft) category 1, 3 point hitch hookup, with standard outside pins and narrow hitch inner pins for sub compact and smaller compact tractors. Working speed is from 3 to 16 m.p.h. at 540 r.p.m, with a 481 pound capacity. Overall dimensions 36" W x 36" Tall, weight is 99 lbs. Assembled.


NOTE: Farm-Max has replaced Agrex. While our informative YouTube videos showcasing Agrex are useful and informative, Farm-Max spreaders have design changes not present in Agrex spreaders.



Our Price: $725.00



Product Code: LBA-FERTILIZER-SPREAD-SP1803PT

Add Farm-Max Bander Kit

Farm-Max Bander Kit:
[Add $305.00]

No Longer Available  
Description Extended Information
 
Farm-Max Tractor PTO Fertilizer Spreader SP-180 3 Point Hitch Cat 1 Free shipping within 1,000 miles!
Agrex Fertilizer Spreader in Action
More
MODEL CAPACITY EMPTY WEIGHT HEIGHT HITCH/HOPPER
SP180 481 lbs. 99 Lbs. 36" 3 Pt./Metal
SP300 765 lbs. 108 Lbs. 42" 3 Pt./Metal
SP500 1027 lbs. 119 lbs. 46" 3 pt./Metal
SPL180 480 lbs. 101 Lbs. 42" 3 Pt./Poly
SPL400 844 lbs. 110 Lbs. 44" 3 Pt./Poly

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 36 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Fertilizer Spreader SP-180 May 31, 2023
Reviewer: Anonymous Person from St Charles, MI United States  
Overall I like the product, it is well made, and has saved me a lot of time and effort so far. Knowing what I know now, and compared to the competition, I would buy it again.

I think there is a shortcoming in the design of the device that allows the feed rate to be preset. This is done by putting stops at predetermined places as the feed lever is opened. I was able to get a pretty accurate rate on one of the items I spread, but on another, one setting did not allow enough material to spread, the next setting allowed way too much to be fed.

I don't know the solution, but it might be nice if the setting was based on how high the feed doors are raised. With a ruler to set the height, and a way to put some type of clamp stop on the lever, perhaps feed rates could be more finely tuned. Just a thought.



Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 28, 2022
Reviewer: ALBERT TINDALL from CADET, MO United States  
Seems to be be just what I needed, but haven't had opportunity to use it yet.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 ready for snow September 5, 2021
Reviewer: GILBERT from WILTON, NH United States  
Ordered along with the salt spreading control kit.  It came with the wrong kit, (seeding). Called and within hours had a return for the kit setup. The correct kit arrived a couple of days later.  Installed everything and hooked up to tractor just to do a dry run before winter, worked great.  Talked with Rusty and Trace, both were good and made sure all was well.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Spreader May 17, 2021
Reviewer: Peter Palumbo from AUBURN, KY United States  
A good price, but whoever assembled the agitator gouged and scratched the paint at the bottom of the metal cone. When I brought this to the company’s attention, they said paint in that area was going to eventually rub off near there anyway. I was expecting a can of touch up spray paint or other compensation instead of an excuse. They may be right, but when you buy something new you don’t want to start off behind on maintenance and playing catch up before you even use it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent American Built Product May 2, 2021
Reviewer: A Roden from Waterford, VA United States  
I purchased this spreader as a long term investment, thus wanted something with the quality to go the distance. I was pleased with the quality, the use of heavy steel and stainless where needed. I’m glad to have purchased an American built product from North Carolina. I’ll be back for more!

Was this review helpful to you?

View All Customer Reviews