QUALITY BY DESIGN® • AMERICAN-BUILT ATTACHMENTS
TALK TO AN EXPERT 1-866-581-5818 (828) 464-1200
CART 0

  Home > Skid Steer Attachments > Digging, Trenching & Augers > Skid Steer Hydraulic Augers by Digga >

Digga Skid Steer Loader Auger Drive 10-36 GPM, 4.5T - 8T (9,900lbs - 17,600lbs)

Digga Skid Steer Loader Auger Drive 10-36 GPM, 4.5T - 8T (9,900lbs - 17,600lbs)
 
Auger Drives for Excavators / Backhoes 10-36 GPM 4.5ton-8ton (9,900 lbs - 17,600 lbs)

Digga's range of auger drives for 4.5-8t excavators and backhoes are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.

Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.

Features
  • Compact high torque Digga manufactured gearbox
  • Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
  • 2 piece shaft design ensures maximum side load ratings without increasing load on bearings
  • Lifetime shaft pull out warranty
  • 5 year gear box and 3 year motor warranty
  • Over 30 years design and manufacturing experience
  • Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
Details 5DDS 6DDS 7DDS
Torque (ft-lbs @ 3000 Psi) 3,903 4,909 6,162
Max Torque (ft-lbs @ 3500 Psi) 4,553 5,728 7,189
Recommended Flow (gpm) 10-36 12-36 14-36
Motor Type Eaton Eaton Eaton
Max pressure (do not exceed) 3500 psi @ 27 gpm
Max flow (do not exceed) 55 gpm @ 1700 psi
Max horse power 55 55 55
Pressure relief valve Included Included Included
standard output shaft 2.5" Hex 2.5" Hex 2.5" Hex
Recommended auger A6 / rC6 A6 / rC6 A6 / rC6
Max drilling diameter
(clay / shale)*		 24" 30" 30"
Max drilling diameter (earth)* 40" 40" 48"
Weight (lbs) 290 290 290
Overall length (in) 33.7" 33.7" 33.7"
Diameter (in) 11.4" 11.4" 11.4"
(*) Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.
Our Price: $5,057.00


Product Code: DGA-5DDS

Description
 
Digga's high torque designed Eaton motor with integrated pressure relief valve eliminates the need for bulky valve blocks and reduces many potential leak points. Two-piece shaft design ensures maximum side load ratings without increasing load on bearings. Easily converted to a Screw Anchor Drive with the addition of our patented ‘Anti Kickback Valve’

Share your knowledge of this product with other customers... Be the first to write a review


Why Choose Us

Finding reliable equipment is as easy as choosing Everything Attachments. With roots going back to the 1850s, we bring decades of real-world expertise, ensuring you get top-tier equipment built to handle tough work. Our customer-first mentality means we never just sell you a product – we take the time to offer honest advice on which setup will serve your specific needs best.

By pairing superior customer service with the best products on the market, we make upgrading your machinery straightforward and stress-free. Partner with a team that values your time, respects your wallet, and stands behind every piece of equipment we sell. We're here to help. Get in touch today.