Home > Skid Steer Hydraulic Augers by Digga >

Digga Skid Steer Loader Auger Drive 10-36 GPM, 4.5T - 8T (9,900lbs - 17,600lbs)

Digga Skid Steer Loader Auger Drive 10-36 GPM, 4.5T - 8T (9,900lbs - 17,600lbs)
 
Auger Drives for Excavators / Backhoes 10-36 GPM 4.5ton-8ton (9,900 lbs - 17,600 lbs)

Digga's range of auger drives for 4.5-8t excavators and backhoes are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.

Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.

Features
  • Compact high torque Digga manufactured gearbox
  • Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
  • 2 piece shaft design ensures maximum side load ratings without increasing load on bearings
  • Lifetime shaft pull out warranty
  • 5 year gear box and 3 year motor warranty
  • Over 30 years design and manufacturing experience
  • Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
Details 5DDS 6DDS 7DDS
Torque (ft-lbs @ 3000 Psi) 3,903 4,909 6,162
Max Torque (ft-lbs @ 3500 Psi) 4,553 5,728 7,189
Recommended Flow (gpm) 10-36 12-36 14-36
Motor Type Eaton Eaton Eaton
Max pressure (do not exceed) 3500 psi @ 27 gpm
Max flow (do not exceed) 55 gpm @ 1700 psi
Max horse power 55 55 55
Pressure relief valve Included Included Included
standard output shaft 2.5" Hex 2.5" Hex 2.5" Hex
Recommended auger A6 / rC6 A6 / rC6 A6 / rC6
Max drilling diameter
(clay / shale)*		 24" 30" 30"
Max drilling diameter (earth)* 40" 40" 48"
Weight (lbs) 290 290 290
Overall length (in) 33.7" 33.7" 33.7"
Diameter (in) 11.4" 11.4" 11.4"
(*) Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.
Our Price: $5,057.00


Product Code: DGA-5DDS

Description
 
Digga's high torque designed Eaton motor with integrated pressure relief valve eliminates the need for bulky valve blocks and reduces many potential leak points. Two-piece shaft design ensures maximum side load ratings without increasing load on bearings. Easily converted to a Screw Anchor Drive with the addition of our patented ‘Anti Kickback Valve’

Share your knowledge of this product with other customers... Be the first to write a review


9008G $680.00
9011G $586.50