Home > Manufacturers > WR Long >

W.R. Long Compact Tractor Loader Snow Push
W.R. Long snow push with replaceable rubber cutting edge and wear pads
W.R. Long Compact Tractor Loader Snow Push


 
Alternative Views:


W.R. Long Snow Push

The Snow Push is for Subcompact and Compact Tractors up to 40 hp and is used for pushing snow. We can build your snow pusher with most any type quick attach, pin on connection, or the scoop in mount for no additional charge. The SP-60 Snow Push weight is 350 pounds, the SP-72 weight is 370 pounds and the SP-84 weighs 390 lbs.


  • The Snow Push comes in 60", 72" and 84" widths.
  • Replaceable Rubber Cutting Edge 1" thick by 6" wide and reversible.
  • Snow Pusher height is approximately 22" and 30" from front to back.
  • Replaceable Skid Pads.
  • Skid Pads made from hardened steel for longer wear
  • Free shipping within 1,000 miles!

360 Degree View Click Here for 360 Degree View

W.R. Long Snow Push with replaceable cutting edge and wear pads. Free shipping within 1,000 miles!


W.R. Long Snow Push
Item# Item Name Our Price Qty Add
WRL-SNOW-PUSH-60 W.R. Long Snow Push 60
$1,374.00
WRL-SNOW-PUSH-72 W.R. Long Snow Push 72
$1,468.00
WRL-SNOW-PUSH-84 W.R. Long Snow Push 84
$1,584.00
Check the items you wish to purchase, then click


Video Transcription:

Hi, I'm Ted from Everything Attachments. We're here today with the W R Long brand of snow push. This comes from a 60 inch. If you had a small, compact tractor, all the way to a seven foot, it would work up to about a 50 horsepower tractor loader. It can come with multiple hitches on the back of it; this one has a standard universal skid steer hitch. We'll turn it around and show you the back in a minute, and we're going to point out some of the good things about this.

The particular runners that are going to take all the abrasion from the asphalt or cement that you're pushing on is true cutting edge material, so it's going to wear slow. They are adjustable and they are replaceable. Your main cutting edge, here, is made of a one inch thick piece of rubber that can be reversed and lowered with these slots as it wears. If you have brick pavers or don't want you asphalt or cement scratched up a lot, that rubber is going to keep that from happening. You just keep lowering it as it wears. You just loosed each bolt on this girdle and slide the rubber down. You can reverse it as you get it further worn down.

It has a nice support here to keep the sides from spreading out, and then we're going to turn around and show you the back of it. You can see here on the sides where it is fully adjustable and has the slots. It's also braced. When you get to the back, this is a standard skid steer hitch. It has a lot of bracing here on the side to spread out the load. If you have a tractor that doesn't have a skid steer hitch and have a pin-on mounts, most pin-on mounts can be done by W R Long. They have more drawings than anybody I know to make a four-pin connection. You can pretty much have anything done that you like on this, and being that it comes from 60 inches, where you could do sidewalks and so forth for the cities with the small tractors, up to seven feet with about a 50 horsepower tractor, this is going to make your snow pushing really good. If you'll give us a call at Everything Attachments, we'll be happy to help size this for the particular machine and make sure that we can do the hitch that you need.




Average Customer Review: 4 of 5 Total Reviews: 1 Write a review.

  0 of 1 people found the following review helpful:
 
good November 13, 2015
Reviewer: Anonymous Person from Holland, MI United States  
the only reason I gave it 4 stars is because I didn't use it yet. the pin on bracket w.r. long built was just right for my tractor and it looks well built, also shipping was just as you said .

Was this review helpful to you?