Home > Manufacturers > Everything Attachments >

EA 60 Inch Wicked Root Rake Grapple
60 Inch Wicked Root Rake Grapple

Alternative Views:

Brought on by Demand. Meet our Ever Popular Wicked 55's juiced up brother! Incredibly strong construction with solid welds and added support in all the right areas. Large bore cylinders create an impressive clamping force so you can efficiently hold rocks, logs, stumps and other debris for transport. We combine the best materials money can buy; a combo unlike anything else on the market. The serrated upper and lower, laser cut AR450 tines are serrated for incredible gripping and ripping ability. Available with Universal Quick Attach(SSQA), John Deere Quick Attach is also available. Ideal for Compact Tractors up to 65 Horsepower with a max ballasted weight of 7,500 pounds.
Root rake top lid is designed for raking loose material backwards and not intended to pry or pull embedded objects such as roots or stumps.

  • 400 pound weight.
  • Proudly Made in the USA!
  • Upper and lower Wicked Tines are laser cut for precision.
  • Beefed up in all the right places, especially the hinge points and cylinder mounts.
  • Dual Cylinder mounting angle and location produces incredible clamping force!
  • Added 3rd hinge to the center for extreme lid rigidity when clamping and raking.
  • Lid tines are doubled at all three hinge points for even more strength!
  • Strong 3/8" AR450 tines are serrated for gripping and ripping.
  • AR450 Steel and DOM tubing is incredibly strong, rigid and durable.
  • 8.25" lower tine spacing.
  • 40" Extra Wide Lid Opening for grabbing large objects and piles!
  • 2 bore x 6 stroke cylinders for extreme gripping power!
  • High stress pivot points are greasable for longevity.
  • Free Shipping within 1,000 Miles!
  • Universal Skid Steer Quick Attach Mount is standard.
  • Several options for hydraulic couplers
  • Standard hose length is 50", which is intended to reach to the side of the loader torque tube.
  • Also available for ALL newer JOHN DEERE loaders including, but not limited to the 120R, D120, H120, H130, H160, D160, H165, D170, H180, 220R and older 200, 300, 400 Series Front End Loaders with special JD quick attach hookup for $50.00...JD does have newer loaders which are the same as the ones listed.
  • Let us know if you have a Kioti with a single lever universal quick attach so we can change hose routing.
  • Grease prior to use.
*Notice* 8/6/2018 Instead of bolted lower runners, we will begin upgrading the lower tines with thick wall DOM tubing, which will serve as a depth gauge and add strength to lower tines. This will be more rigid and durable for rough applications.

*Primo Materials 101*
DOM, or Drawn Over Mandrel, tubing is made from a cold-drawn electrical resistance welded tube that is drawn through a die and over a mandrel to create dimensional accuracy, dependable weld integrity and an excellent surface finish(which we manually scuff so the paint will hang on). DOM has high tensile and yield strength, so It is generally chosen over welded tube where high pressure or large workloads are needed such as the manufacturing of race cars and motorcycle frames.

*NEW Enhanced, Laminated Lower Tine Design*
**Strongest in the Industry, by a LONG Shot**

If you need a 3rd function kit for your tractor, check out the custom kit we offer for many tractors here: WR Long 3rd Function Kit

Our Price: $2,650.00

Product Code: ETA-60-WRRG

Optional Mounts

John Deere Mount:
John Deere Compact QA Build Fee [Add $50.00]
Special Color

Black (No Cost)
John Deere Green [Add $50.00]
Kubota Orange [Add $50.00]

60 Wide.  Weighs only 400 Pounds to MAXIMIZE Lift Capacity! Free Shipping within 1,000 miles!
Testing with Ted and Kubota L6060
Easy Tree Removal
More Deere Action - Sapling Pulling

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 115 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Wicked strong September 28, 2020
Reviewer: Edward from Morris, IL United States  
The wicked 60” grapple is the perfect size and strength for my kubota Mx5400. It has about 20 hours of use on it currently and I couldn’t have asked for a better build.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Worth the extra money September 16, 2020
Reviewer: Keith Plumstead from Flemington, NJ United States  
Was hesitant to spend the extra money that the Wicked 60 costs, but at 400lbs lighter than all the others out there, it was well worth it!  Most tractors will only pick up around 2,000 lbs, so it makes a big difference.  I won a metal fabrication company and I can tell you that this is a very well-built piece.  No made in China junk here.  Very expensive steel used.  Very happy with it so far.  Only complaint would be that it took about 6 weeks to receive, but they told me that upfront.  Worth the wait and extra money.  Installed on my 2020 Kioti DK4210.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 First impressions September 16, 2020
Reviewer: Jason C. from MI United States  
This thing looked bad A$$ when it did show up. During first install onto my quick attach front end on my Mahindra 3540, the hyd. line fittings are stupid close to the center torque plate. Its less then 1/8 inch, so that makes the area a high point for breaking the fittings off during install or removal and stressful to boot. There are some areas not welded during the install only on one side leaving an exposed open rectangles.
For the money spent, I highly think some expanded metal should be added from the factory to protect your hyd. lines and grill area. The channel that the hydraulic lines sit in has already rubbed grooves into the lines. A simple design change or the factory adding some protective wraps to lines would be a nice thought for the money they want for this thing.
Yes, I have already put 32-35 hrs on this piece it opens and closes as it should. I would just like to see some improvements for the money. If things could be improved I would consider changing my rating.  EA RESPONSE:  Customer is being contacted concerning the fittings and weld areas to see if something was missed, because we have never have had reports like this.  We do design this grapple to install really close to the tractor, as close as possible, to totally maximize lift capacity.  Many guys add expanded metal to their tractor grille guard for protection, rather than to the grapple.  Adding it to the grapple restricts visibility and increases the chances of fine material getting stuck in it.  The hose channel is designed to keep the hoses out of the way, and the hoses do touch the edges...but, hoses are designed with a tough, synthetic, rubbery coating which protects them.  The hoses also have strong steel braids which protect the rubber, inner hose, so touching the channel edges has never been an issue.  Thanks for the business.   We're confident this grapple will outlast the tractor and provide many years of awesome service!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 60" root rake grapple September 11, 2020
Reviewer: Donnie P from Defuniak Springs, FL United States  
My review consist of one word AWESOME!!!!!!
my wife has had to restrict my play time because if she hadn't there wouldn't be any trees or under brush left on my 35 acres:-)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Works well in the Woods!! September 9, 2020
Reviewer: Kevin Trowbridge from Eugene, OR United States  
I have had the grapple for a few weeks now and have not had an opportunity to use it extensively (extreme dry conditions) but on a few occasions I built some very large burn piles from trees I dropped and up-rooted a number of dead trees.  This grapple has worked flawlessly!!  I would recommend this project to anyone who wants to make life easy...especially old farts like me!!  Gotta work smarter, not harder and this grapple makes it possible!

Was this review helpful to you?

View All Customer Reviews